中華民國空軍官校-單位介紹-學術單位-教學部-師資介紹

::: 首頁 > 單位介紹 > 學術單位 > 教學部 > 師資介紹

｜分享到

師資介紹

113-05-01

魏欽益

電話：07-6268881分機114
職稱：副教授兼系主任

學歷：　　　　

Ph.D., Engineering (Fluid Mechanics), Institute of Aeronautics and Astronautics, National Cheng Kung University(NCKU), April 1992
B.S., Department of Aeronautics and Astronautics, NCKU, June 1986

經歷：
副教授(Associate professor)
系主任(Chairman of Department of Aeronautical and Astronautical Engineering, ROC Air Force Academy )
部主任(Director of the School of Academic Studies, ROC Air Force Academy)

研究方向：
l Experimental fluid dynamics
l Vortex stretching and instability
l Wake flow
l Wind/water tunnel design and testing
l Aerodynamic heating in hypersonic flow
l Micro aerial vehicle(MAV)
l Flux and pressure control in pipes
l Flow meter
教授課程：
l Fluid Mechanics
l Aerodynamics
l Applied Aerodynamics
l Experiments of Aerodynamics
l Gas Dynamics
l Flight Dynamics
l Viscous Fluid Flows
l Aircraft Design
l Potential Flow
l Application of Aeronautical Engineering

AWARD：
l Excellent work of Research and Development Report for Education and Training, General Headquarters of the Republic of China Air Force (GHROCAF), 1994.
l Award of excellent teacher of GHROCAF, 1995.
l Good work of the 2nd Competition of the Design and Testing of Unmanned Aerial Vehicle, Dec. 1999, ROC (major consultant advisor).
l Good work of the 3rd Competition of the Design and Testing of Unmanned Aerial Vehicle, Dec. 2000, ROC (major consultant advisor).
l The third winner of the 4th Competition of the Design and Testing of Unmanned Aerial Vehicle, Dec. 2001, ROC (consultant advisor).
l Excellent research award on “How to Elevate the Researching and Teaching Level of Military Academy” by National Defense Ministry (NDM), Dec. 2001.
l Award of excellent teacher of GHROCAF, 2003.
l Who’sWho in Science and Engineering, 2005, Marquis Who’s Who LLC, USA.
l Award of excellent teacher of National Defense Ministry of the Republic of China, 2005.
l Leading Educator of the world, 2005, International Biographic Centre, Cambridge, England.
l Great Minds of the 21st Century, 2005/2006, American Biographical Institute, Inc.
l Who’sWho in the World, 2006, Marquis Who’s Who LLC, USA.
l 2000 Outstanding Scientists of the 21st Century, 2006, International Biographic Centre, Cambridge, England.
l The Research Board of Advisors, 2006, the American Biographical Institute, USA.
l Who’sWho in Science and Engineering, 2007, Marquis Who’s Who LLC, USA.
l The 2nd winner of 2007 Taiwan Unmanned Aerial Vehicle Design Competition, advanced group, 2007, ROC (consultant advisor).
l Who’sWho in Asia, 2007, Marquis Who’s Who LLC, USA.
l Who’sWho in the World, 2007, Marquis Who’s Who LLC, USA.
l The 2nd winner of 2008 Taiwan Unmanned Aerial Vehicle Design Competition, advanced group, 2008, ROC (consultant advisor).
l Great Minds of the 21st Century, Third Edition, 2008, American Biographical Institute, Inc.
l Who’sWho in the World, 2009, Marquis Who’s Who LLC, USA.
l The 4th winner of the 2009 Taiwan Robot Aircraft Design Competition, advanced group, 2009, ROC (consultant advisor).
l Award of excellent teacher of ROCAFA, 2009.
l The 2nd winner of the 2010 Taiwan Robot Aircraft Design Competition, 初階引擎載重組, 2009, R.O.C. (consulting advisor).
l The BEST REPORT AWARD of the 2010 Taiwan Robot Aircraft Design Competition, 2009, R.O.C. (consulting advisor).

INVITED LECTURE：
l “Vortex Stretching and Hypersonic Ablation in Stagnation Region”, the Fluid Dynamic Workshop in National Cheng-Kung University, July 4, 2001 (in English).
l “Applied Aerodynamics”, the Second Flight Troop of the Navy, Kaohsiung, Taiwan, ROC, Aug. 2, 2001.
l “Applications of Fluid Dynamics in Technology and in Daily Life”, the Department of Mechanical Engineering, I-SHOU University, Kaohsiung, Taiwan, ROC, Mar. 13, 2002.
l “Some Researches of Flow around Bluff Bodies”, Department of Civil Engineering, National Chung Hsing University, Taichung, Taiwan, ROC, Dec. 19, 2002.
l “Some Researches of Flow in Stagnation Region of Bluff Bodies”, Department of Aeronautical Engineering, Feng Chia University, Taichung, Taiwan, ROC, Dec. 26, 2002.
l “流量計測試之量測不確定度評估”，台灣省自來水公司第六區管理處，July, 2004.
l “污水流量計實務---流量計與廢污水管理”，經濟部工業局環境保護中心，Feb. 23, 2006.
l “水量計簡介”，台南科學園區管理局，Jan. 18, 2007.
l “渦流流量計原理與標準”，台北科技大學機械系，Jan. 31, 2007.
l “流量計實驗與品質探討”， The Department of Mechanical Engineering, I-SHOU University, Kaohsiung, Taiwan, ROC, Apr. 2, 2008.
l “747跨洋之旅”， The Department of Mechanical Engineering, Yung Ta Institute of Technology, Pingtong, Taiwan, ROC, Mar. 25, 2009.
l “Aircraft Design, Manufacture and Travel,” The Department of Mechanical Engineering, I-SHOU University, Kaohsiung, Taiwan, ROC, Apr. 15, 2009.
l “流量計校正之量測不確定度評估”，David & Huang Contromatic Technology Co., Feb., 2011.
l “747跨洋之旅”， The Department of Mechanical Engineering, Chang Jung Christian University, Tainan, Taiwan, R.O.C., Mar. 8, 2011.
l “流量計測試之量測不確定度評估”，台南科學園區弓銓企業股份有限公司，July, 2011.

PatentS：
1. 新型專利【流量計之構造】，中國，ZL 03 2 51491.3，2004/04/21。
2. 新型專利【流量計】，中國，ZL 03 2 61285.0，2004/07/28。
3. 發明專利【以多層滾珠滑盤與滾珠軸承製作多方向受力量測機構】，中華民國，發明第202026號，2004/05/01~2022/11/28。
4. 新型專利【流量計之構造改良】，中華民國，新型第224129號，2004/06/01。
5. 新型專利【流量調節裝置】，中華民國，新型第M261606號，2005/04/11~2014/09/05。
6. 新型專利【多葉輪型流量計】，中華民國，新型第 M258280 號，2005/03/01~2014/05/24。
7. 新型專利【多葉輪型流量計】，中國，新型第ZL2004 2 0066911.6號，2004/06/10~2014/06/09。
8. 新型專利【流量計】，中華民國，新型第M276990號，2005/10/01~2015/05/01。
9. 新型專利【一種流量計】，中國，新型第 ZL 2005 2 0018244.9 號，2005/05/12~2015/05/11。
10. 新型專利【流量計後端整流裝置】，中華民國，新型第 M 315330 號，2007/07/11~2017/01/29。

代表性著作：

A. Published/Accepted Journal Papers
1. Wei, C. Y. and Miau, J. J., 1991, “Influences of Freestream Turbulence and Wake on Flow near the Stagnation Region,” Journal of the Chinese Society of Mechanical Engineers, Vol. 12, No. 6, pp. 555-562. 【EI; NSC 78-0401-E006-33 & NSC 80-0401-E006-35】
2. Miau, J. J., Wei, C. Y., Chou, J. H. and Lin, C. K., 1992, “Influences of Inlet Conditions on Flow Distortion in a Circular-to-Rectangular Transition Duct,” International Journal of Turbo and Jet Engines, Vol. 9, pp. 67-83. 【SCI; EI】
3. Wei, C. Y. and Miau, J. J., 1992, “Stretching of Freestream Turbulence in Stagnation Region,” AIAA Journal, Vol. 30, No. 9, pp. 2196-2203. 【SCI; EI; NSC 80-0401-E006-35】
4. Wei, C. Y. and Miau, J. J., 1993, “Characteristics of Stretched Vortical Structures in Two-Dimensional Stagnation Region,” AIAA Journal, Vol. 31, No. 11, pp. 2075-2082. 【SCI; EI; NSC 80-0401-E006-35】
5. Wei, C. Y. and Miau, J. J., 1994, “Measurement of Counter-Rotating Vortical Structure in Stagnation Region,” Journal of the Chinese Society of Mechanical Engineers, Vol. 15, No. 6, pp. 615-624. 【EI; NSC 80-0401-E006-35】
6. Wei, C. Y. and Miau, J. J., 1994, “Flow Pattern Visualization of an Axisymmetric Stagnation Flow,” Transactions of the Aeronautical and Astronautical Society, ROC, Vol. 26, No. 4, pp. 311-318. 【NSC 78-0401-E006-33 & NSC 80-0401-E006-35】
7. Wei, C. Y., 1998, “Development of Shed Vorticities in Three-Dimensional Stagnation Regions,” Transactions of the Aeronautical and Astronautical Society, ROC, Vol. 30, No. 2, pp. 119-129. 【NSC 83-0424-E013-007 及NSC 84-2212-E013-006】
8. Wei, C. Y., Chang, J. R., and Kuan, Y. W., 1998, “Influence of Shear Flow and End Effects on the Wake Downstream of a Circular Cylinder,” Journal of Chien-Chiao, ROC, Vol. 5, pp. 55-76. 【NSC 86-2612-E013-001】
9. Zien, T. F. and Wei, C. Y., 1999, “Heat Transfer in the Melt Layer of a Simple Ablation Model,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 13, No. 4, pp. 450-459. 【SCI; EI; NSC 89-2212-E-013-003】
10. Miau, J. J., Wang, J. T., Chou, J. H., and Wei, C. Y., 1999, “Characteristics of Low-Frequency Variations Embedded in Vortex Shedding Process,” Journal of Fluids and Structures, Vol. 13, pp. 339-359. 【SCI; EI; NSC 85-2622-E-006-018】
11. Wei, C. Y. and Zien, T. F., 2001, “Integral Calculations of Melt-Layer Heat Transfer in Aerodynamic Ablation,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 15, No. 1, pp. 116-124. 【SCI; EI; NSC 89-2212-E-013-003】
12. Hu, C. C., Miau, J. J., Wei, C. Y. and Chou, J. H., 2002, “On the Scale of Stretched Vortical Structures in the Forward Stagnation Region of a Bluff Body,” Journal of the Chinese Society of Mechanical Engineering, Vol. 23, No.1, pp. 21-28. 【EI】
13. Wei, C. Y. and Chang, J. R., 2002, “Wake and Base-Bleed Flow Downstream of Bluff Bodies with Different Geometry”, Experimental Thermal and Fluid Science, Vol. 26, Issue 1, pp. 39-52. 【SCI; EI; NSC 89-2612-E-013-001】
14. Shiah, Y. C., Fang, Jiunn, Wei, C. Y., and Liang, Y. C., 2002, “In-Plane Bending Fracture of a Large Beam Containing a Circular-Arc Crack”, The Chinese Journal of Mechanics-Series A, Vol. 18, No. 3, pp. 145-151. 【EI】
15. Miau, J. J., Wang, J. T., Chou, J. H. and Wei, C. Y., 2003, “Low-Frequency Fluctuations in the Near-Wake Region of a Trapezoidal Cylinder with Low Aspect Ratio”, Journal of Fluids and Structures, Vol. 17, pp. 701-715. 【SCI; EI】
16. Wei, C. Y., 2007, “Aerodynamic Analysis and Manufacturing a Micro Aerial Vehicle”, Engineering Science & Technology Bulletin, Vol. 91, pp. 78-83.
17. Lin, J. L., Wei, C. Y. and C. Y. Lin, 2007, “Aerodynamic Performance of Thin Wings at Low Reynolds Numbers”, International Journal of Aircraft Engineering and Aerospace Technology, Vol. 79, No. 3, pp. 245-253. 【SCI; EI】
18. Lin, J. L., Wei, C. Y. and C. Y. Lin, 2007, “Design and Testing of Fixed-Wing MAVs”, International Journal of Aircraft Engineering and Aerospace Technology, Vol. 79, No. 4, pp. 345-351. 【SCI; EI】
19. Lin, J. L., Wei, C. Y. and C. Y. Lin, 2009, “Aerodynamic Performance of Thin Wings at Low Reynolds Numbers”, Aircraft Engineering and Aerospace Technology : An International Journal, Vol. 81, No. 1, pp. 51-58. 【SCI; EI】

B. Conference Papers
1. Miau, J. J., Lin, S. A., Chou, J. H., Wei, C. Y. and Lin, C. K., 1988, “An Experimental Study of Flow in a Circular-Rectangular Transition Duct,” AIAA/ASME/SAE/ASEE 24th Joint Propulsion Conf., AIAA paper no. 88-3029.
2. Miau, J. J. and Wei, C. Y., 1990, “Influences of Freestream Turbulence and Wake on Flow near the Upstream Faces of Two-Dimensional and Axisymmetric Bluff Bodies,” Proceedings of the 7th National Conf. of Chinese Society of Mechanical Engineers, ROC, pp. 607-614.
3. Wei, C. Y. and Miau, J. J., Nov. 1993, “A Study on the Vortex Stretching of an Axisymmetric Stagnation Flow,” The 35th Conf. on Aeronautics and Astronautics, ROC, pp. 159-166.
4. Wei, C. Y. and Miau, J. J., Dec. 1993, “Measurement of the Length Scale of Unsteady Nonperiodic Vortical Structures,” Proceedings of the 10th National Conf. of Chinese Society of Mechanical Engineers, ROC, pp. 107-115.
5. Wei, C. Y. and Miau, J. J., June 1994, “Comparison of Flow Behavior in Two-Dimensional and Axisymmetric Stagnation Flows,” The 1st Military Academy Symposium on Fundamental Science, ROC, pp. 243-252.
6. Wei, C. Y. and Miau, J. J., Sep. 1994, “Measurement of the Length Scale of Unsteady Nonperiodic Vortical Structure,” Proceedings of the 1st International Conf. on Flow Interaction, Hong Kong, pp. 378-381.
7. Wei, C. Y., May 1995, “分隔板對三角翼流場的影響,” The 2nd Military Academy Symposium on Fundamental Science, ROC, pp. 173-183.
8. Wei, C. Y. and Chang, U, 1995, “具Y方向渦性之上游紊流在三維停滯區的發展,” Proceedings of the 12th National Conf. of Chinese Society of Mechanic Engineers, ROC, pp. 69-78.
9. Wei, C. Y., May 1996, “前緣形狀與分隔板對連機身之三角翼流場的影響”, The 3rd Military Academy Symposium on Fundamental Science, ROC, pp. 243-248.
10. Wei, C. Y., 1996, “Stretching of Uni-Directional Upstream Vorticity in Three-Dimensional Stagnation Regions,” The 38th Conf. on Aeronautics and Astronautics, ROC, pp. 95-102.
11. Chu, S. S., and Wei, C. Y., 1996, “Study of the Jet-Plate Interaction Using the Method of Hodograph Transformation,” The 38th Conf. on Aeronautics and Astronautics, ROC, pp. 191-197.
12. Wei, C. Y., 1997, “Detecting the Thickness of Stagnation Boundary Layer by Surface-Pressure Measurement,” The 4th Military Academy Symposium on Fundamental Science, ROC, pp. 763-770.
13. Wei, C. Y., Kuan, Y. W., and Chang, J. R., 1997, “利用梯形蜂巢網產生剪流效應之探討,”The 4th Military Academy Symposium on Fundamental Science, ROC, pp. 771-779.
14. Wei, C. Y., Chang, J. R., and Kuan, Y. W., Dec. 1997, “剪流與邊界效應對圓柱尾流之影響,” The 39th Conf. on Aeronautics and Astronautics, ROC, pp. 427-434.
15. Miau, J. J., Wang, J. T., Chou, J. H., and Wei, C. Y., Dec. 1997, “鈍形體尾流低頻擾動之實驗研究,” The 39th Conf. on Aeronautics and Astronautics, ROC, pp. 523-529.
16. Wei, C. Y., Mar. 1998, “溢放渦漩在三維停滯區的渦流拉伸現象,” The 8th Conf. on Applying Combustion Technology (The Competition of Heat and Fluid Flow Photographic Contest), ROC, pp. 493-498.
17. Wei, C. Y., Kuan, Y. W., and Chang, J. R., May 1998, “紊流場中縫隙寬度對並列之雙圓柱尾流的影響,” The Chinese Military Academy Symposium on Fundamental Science of Mechanics, ROC, pp. 1-7.
18. Wei, C. Y., Chang, J. R., and Kuan, Y. W., May 1998, “剪流對並列之雙圓柱縫隙流與尾流交互作用之探討,” The 5th Military Academy Symposium on Fundamental Science, ROC, pp. 3.04-1~3.04-6.
19. Miau, J. J., Wang, J. T., Chou, J. H., and Wei, C. Y., Jun. 1998, “Side-Wall Effect on the Low-Frequency Variations Embedded in the Vortex Shedding Process,” ASME Fluids Engineering Division Summer Meeting, Washington, D.C.
20. Wei, C. Y. and Chang, J. R., Dec. 1998, “並列之雙平板尾流與縫隙流流場特性探討,” The 40th Conf. on Aeronautics and Astronautics, ROC, pp. 57-62.
21. Zien, T. F. and Wei, C. Y., Jan. 1999, “Heat Transfer in the Melt Layer of a Simple Ablation Model,” The 37th AIAA Aerospace Science Meeting, Reno, NV, AIAA paper 99-0470.
22. Gwo-Bin Lee, Yu-Cheng Lin, Jung-Hua Chou, Jiun-Jih Miau, Chin-Yi Wei, Yuan-Feng Gai and Hsiang-Chieh Wu, Apr. 1999, “應用MEMS壓力感測器研究滯流區紊流特性”, The 5th Annual MEMS Conference, Tainan, Taiwan, ROC.
23. Wei, C. Y. and Chang, J. R., May 1999, “並列之二維柱體縫隙流與渦流溢放特性探討,” The 6th Military Academy Symposium on Fundamental Science, ROC, pp. 469~476.
24. Wang, J. T., Miau, J. J., Chou, J. H., and Wei, C. Y., May 1999, “渦流溢放過程低頻分量之探討,” The 6th Military Academy Symposium on Fundamental Science, ROC, pp. 493~500.
25. Gwo-Bin Lee, Yuan-Feng Gai, Hsiang-Chieh Wu,Yu-Cheng Lin, Jung-Hua Chou, Jiun-Jih Miau and Chin-Yi Wei, May 1999, “Development of a Surface-Micromachined Pressure Sensor on a Flexible Substrate,” The 3rd Nano Engineering and Micro System Technology Workshop.
26. Chang, J. R. and Wei, C. Y., Dec. 1999, “並列雙梯形平板之尾流與縫隙流流場探討”, AASRC/CIROC/CSCA Aerospace Joint Conference, ROC, pp. 55-60.
27. Wang, J. T., Miau, J. J., Chou, J. H., and Wei, C. Y., Dec. 1999, “渦流溢放過程低頻擾動定量之探討”, AASRC/CIROC/CSCA Aerospace Joint Conference, ROC, pp. 77-84.
28. Wei, C. Y. and Zien, T. F., Jan. 2000, “Integral Calculations of Melt-Layer Heat Transfer in Aerodynamic Ablation,” The 38th AIAA Aerospace Science Meeting, Reno, NV, AIAA paper 00-0205.
29. Wei, C. Y. and Chang, J. R., Oct. 2000, “不同形狀柱體並列時之尾流與縫隙流流場探討,” The Conference of Aeronautical and Mechanical Engineering Applications, Kaohsiung, ROC.
30. Wei, C. Y. and Chang J. R., Mar. 2001, “Wake and Base-Bleed Flow Downstream of Bluff Bodies with Different Geometry”, 2001 CIROC/CSCA/AASRC Joint Conference, AA59-AA66.
31. Wei, C. Y., Oct. 2001, “Reconsideration on Vortex Stretching Mechanism in Stagnation Region,” The CAFA Conference of Aviation Safety and Management.
32. Hu, C. C., Miau, J. J., Wei, C. Y., and Chou, J. H., Dec. 2001, “On the Scale of Stretched Vortical Structures in the Forward Stagnation Region of a Bluff Body,” Proceedings of the 25th Conf. of Mechanics, Feng-Chia University.
33. Wei, C. Y., et. al., Dec. 2001, “如何提昇軍校教師教學與研究水準之研究,” Conference of Military Education.
34. Shiah, Y. C., Fang, Jiunn, Wei, C. Y., and Liang, Y. C., Jun. 2002, “Fracture of a Circular-Arc Crack Containing Large Beam Subjected to In-Plane Bending”, The 9th Military Academy Symposium on Fundamental Science, ROC.
35. Shiah, Y. C., Fang, Jiunn, Wei, C. Y., and Liang, Y. C., Jun. 2002, “A Large Beam/Truss Weakened by a Slightly Curved Crack”, The 9th Military Academy Symposium on Fundamental Science, ROC.
36. Wei, C. Y., Lin, J. L., and 唐德維, Oct. 18, 2002, “低雷諾數二維翼剖面之尾流渦流溢放特性研究”, The CAFA Conference of Aeronautical and Astronautical Engineering, pp. 27-36.
37. Wei, C. Y. and Lin, J. L., Oct. 18, 2002, “Modeling on Heat Transfer Effect of Melt-Layer in Hypersonic Aerodynamic Ablation”, The CAFA Conference of Aeronautical and Astronautical Engineering, pp. 167-176.
38. Wei, C. Y., “管流壓力即時自動追蹤控制系統”, 2003 AASRC/CSCA Joint Conference.
39. Lin, J. L. and Wei, C. Y., Oct. 15, 2004, “碳化燒蝕熱傳模式之數值模擬”, 2004 Conference on Aeronautical and Mechanical Engineering, pp. A2-07 ~A2-14.
40. Hsiao, F. B., Lin, C. Y., Wei, C. Y., and Chiang, C. H., Dec. 03, 2004, “Investigation of Aerodynamic Performance on Low-Aspect-Ratio Wings at Low Reynolds Numbers”, Proceedings of the 28th Conf. of Mechanics.
41. Wei, C. Y., Lin, C. Y., and Hsiao, F. B., Dec. 12, 2004, “低雷諾數薄機翼之氣動力特性研究,” 2004 AASRC/CCAS Joint Conference.
42. Wei, C. Y., Huang, D. and Yang, Y. Y., Nov. 17, 2005, “水量計量測不確定度探討”, 中華民國自來水協會第22屆自來水研究發表會。
43. 陳建霖, 馬俊生, 魏欽益, 孫承緯, “微小型水下載具之阻力與推力量測的實驗方法與分析”, The 29thNational Conference on Theoretical and Applied Mechanics,Dec. 16-17, 2005, NTHU, Hsinchu, Taiwan, R.O.C.
44. Lin, C. Y., Wei, C. Y., and Chiang, C. H., Hsiao, F. B., Dec. 10, 2005, “薄機翼微飛機之氣動力特性研究”, 2005 AASRC/CCAS Joint Conference.
45. Fei-Bin Hsiao, Chi-Yu Lin, Yi-Chung Liu, Di-Bao Wang, Chin-Yi Wei, Chih-Huang Chiang and Cheng-Chian Hsu, “Investigation of Aerodynamic Performance on Low-Aspect-Ratio Wings at Low-Reynolds Number,” 44th Aerospace Sciences Meeting and Exhibit, Jan., 1-12, 2006, Reno, Nevada, USA.
46. Wei, C. Y., and Huang, D., Nov. 17, 2006, “雙計量機構水量計之設計開發”, 中華民國自來水協會第23屆自來水研究發表會。
47. 羅德偉, 陳建霖, 魏欽益, 黃佑仲, Oct. 12, 2007, “渦流流量計於圓管之數值模擬與驗證”, 2007空軍官校航空太空工程學術研討會。
48. Wei, C. Y., Chen, J. L. and Huang, David, July 31, 2009, “水量計量測不確定度分析與實驗驗證”, The 18th Hydraulic Engineering Conference.
49. Chen, J. L. and Wei, C. Y., Sep. 18, 2009, “渦流流量計在不同入流條件之數值模擬與分析”, 2009航空機械工程學術研討會.
50. Chen, J. L., Lin, J. W., Chen, P., Wei, C. Y., and Huang, Y. C., Oct. 13-15, 2010, “Numerical Simulation on the Flow Field of a Vortex Flowmeter with Various Upstream Conditions”, 15th Flow Measurement Conference (FLOMEKO), Taipei, Taiwan, R.O.C.
51. Chen, J. L., Wei, C. Y., Huang, David, and Lin, J. W., “A Numerical Study on the Accuracy of a Vortex Meter due to the Flow Quality Downstream of Piping Configurations”, The 10th Asian International Conference on Fluid Machinery, 21st – 23rd October, Kuala Lumpur Malaysia.
52. 陳建霖, 方冠文, 林智偉, 魏欽益, Nov. 19-20, 2010, “方管內漸縮圓柱之渦流溢放頻率分佈的模擬分析”, 中華民國力學學會第三十四屆全國力學會議。
53. 陳建霖、林智偉、魏欽益, Nov. 10-11, 2010, “90度彎管結合渦流流量計之流場品質的模擬與分析”, 第十九屆水利工程研討會.
54. 陳建霖、李冠賢、魏欽益，Nov. 18-19, 2011, “計算網格對數值模擬漸縮圓柱下游處之頻率階梯化的影響”，中華民國力學學會第三十五屆全國力學會議。

C. Books
1. Wei, C. Y., Mar. 1997, “空氣動力學實驗,” published by GHROCAF.
2. Wei, C. Y., June 2001, “空氣動力學實驗(增修版)” published by GHROCAF.
3. Wei, C. Y., Sep. 2006, “空氣動力學實驗(再增修版)” published by GHROCAF.
4. Wei, C. Y., Oct. 2009, “空氣動力學實驗(再增修版)” published by GHROCAF.

D. Other Publications
1. 蕭坤龍，魏欽益，呂光民，金佩琳， “風洞的研究與設計,” 中國工程師學會，學生論文比賽佳作，1986。(also appeared on成功大學航空太空學系系刊，pp. 96-111, 1986.)
2. “Mechanism of Vorticity Stretching in Stagnation Region,” Ph.D. Thesis, IAA/NCKU, ROC, 1992.
3. Wei, C. Y., 1993, “失速控制之介紹與展望,” Chinese Air Force Officer Monthly, Vol. 48, pp. 11-19。
4. Wei, C. Y., “分隔板對三角翼流場的影響,” 行政院國科會研究計劃報告, NSC 83-0424-E013-006T.
5. Wei, C. Y., “如何落實流力及空氣動力學實驗教學,” 空軍總部八十三年第一季教育訓練研究發展專題報告，第一名，1994。
6. Wei, C. Y., “三維流場效應對停滯區渦流流場之影響,” 行政院國科會研究計劃報告, NSC 83-0424-E013-007; NSC 84-2212-E013-006.
7. Wei, C. Y., “前緣形狀與分隔板對連機身之厚三角翼流場的影響,” 行政院國科會研究計劃報告, NSC 84-2212-E013-001.
8. Wei, C. Y., 1995, “如何落實流力及空氣動力學實驗教學,” Chinese Air Force Academic Monthly, Vol. 460, pp. 32-39。
9. Wei, C. Y., “剪流對單圓柱及並列之雙圓柱尾流的影響,” 行政院國科會研究計劃報告, NSC 86-2612-E013-001.
10. Wei, C. Y., 1995, “邊界層隔板對三角翼渦流流場轉換過程的影響”, 國科會航空學門研究成果研討會, pp. 91-95.
11. Wei, C. Y., 1996, “具Y方向渦性之上游紊流在三維停滯區的發展”, 國科會航空學門研究成果研討會, pp. 230-239.
12. Wei, C. Y., 1998, “剪流對不同形狀柱體周圍流場交互作用之影響”, 國科會航空學門研究成果報告.
13. Wei, C. Y., 1998, “剪流對單圓柱及並列之雙圓柱尾流的影響”, 國科會航太學門研究成果研討會, pp. II-183~II-186.
14. Wei, C. Y., 1998, “流體力學在科技作戰與生活上之應用”, Chinese Air Force Academic Monthly, Vol. 499, pp. 36-48。
15. Wei, C. Y., 1999, “剪流對不同形狀柱體周圍流場交互作用之影響”, 國科會航太學門研究成果研討會暨國科會研究計劃報告, NSC 87-2212-E-013-003.
16. Wei, C. Y., 1999, “並列之梯形平板尾流與縫隙流交互作用之流場探討”, 國科會研究計劃報告, NSC 88-2212-E-013-002, also presented on 7th Conference of NSC Research Report第七屆國科會航太學門研究成果研討會(Apr. 2000).
17. Wei, C. Y. (指導教授), Dec. 1999, “CAFA-1之設計與製作”, 中國航空太空學會全國大專學生遙控飛機設計製作競賽佳作, AASRC/CIROC/CSCA Aerospace Joint Conference, ROC.
18. Wei, C. Y., 1999, “極音速流之流場特性與熱傳效應介紹”, Chinese Air Force Officer Monthly, Vol. 87, pp. 3-10.
19. Wei, C. Y., 2000, “IAF年會及Delft大學航空學院參訪紀要”, Chinese Air Force Officer Monthly, Vol. 90, pp. 56-64.
20. Wei, C. Y., 2000, “無人駕駛飛機在二十一世紀戰場上的角色”, Chinese Air Force Officer Monthly, Vol. 91, pp. 3-11.
21. Wei, C. Y., 2000, “不同形狀柱體並列時之尾流與縫隙流流場探討”, 國科會研究計劃報告, NSC 89-2612-E-013-001.
22. Wei, C. Y. (協同研究人員), 2000 “應用MEMS壓力感測器研究滯流區紊流特性(II),” 國科會研究計劃報告, NSC 89-2612-E-006-020。Also appeared on Engineering Science & Technology Bulletin, NSC，Vol. 55, pp. 159-163。
23. Wei, C. Y. (指導教授), Dec. 2000, “TP-X無人遙控飛機之設計與製作”, 中國航空太空學會全國大專學生遙控飛機設計製作競賽, 佳作, AASRC Conference, ROC.
24. Wei, C. Y., 2001, “極音速飛行體鼻端熔解層熱傳效應之數學模式分析”, 國科會研究計劃報告, 89-2212-E-013-003.
25. Wei, C. Y., 2001, “如何提升軍校教師教學與研究水準之研究”，國防部國軍九十年度「軍事教育專案研究」計畫期末報告，計畫編號：B26 -- 空02。
26. Wei, C. Y. (協同指導教授), Dec. 2001, “無人遙控飛機之設計與製作”, 中國航空太空學會全國大專學生遙控飛機設計製作競賽, 第三名, AASRC Conference, ROC.
27. Wei, C. Y., 2002, “極音速飛行體鼻端熔解層熱傳效應之數學模擬)”, 國科會研究計劃報告, NSC 90-2212-E-013-002.
28. Wei, C. Y., 2003, “微型無人飛行載具之氣動力特性分析與研製（I）”, 國科會研究計劃期中報告, NSC 91-2212-E-013-001.
29. Wei, C. Y., 2003, “管流壓力即時自動追蹤控制系統”,國科會研究計劃報告, NSC 91-2622-E-013-001-CC3.
30. Wei, C. Y., 2004, “微型無人飛行載具之氣動力特性分析與研製(II)”, 國科會研究計劃期中報告, NSC 92-2212-E-013-001.
31. Wei, C. Y., 2005, “微型無人飛行載具之氣動力特性分析與研製”, 國科會研究計劃期末報告, NSC 93-2212-E-013-001.
32. Wei, C. Y. (指導教授), May 25-26, 2007, “無人遙控飛機之設計與製作”, 2007全國大專學生無人飛行載具設計競賽，進階組第二名。
33. Wei, C. Y. (指導教授), Mar. 2008, “Dr. Fly UAV Design”, 2008全國大專學生無人飛行載具設計競賽，進階組第二名。
34. Wei, C. Y. (指導教授), Mar. 14-15, 2009, “無人遙控飛機之設計與製作”, 2009台灣無人遙控飛機競賽，進階組第四名。
35. Wei, C. Y., 2009, “從空軍官校80週年校慶談教學部新展望”, Chinese Air Force Academic Bimonthly, Vol. 147, pp. 80-82。(空軍軍官雙月刊)
36. Wei, C. Y., 2009, “泳渡日月潭--空官泳士的長泳之旅”, Chinese Air Force Academic Bimonthly, Vol. 149, pp. 2-3。(空軍軍官雙月刊)

E. Research Projects
1. “二維噴嘴引擎的轉接段併入後燃器之流場探討(II): 探討不同轉接段入口流場情況對下游流場的影響,” 研究助理, Mar. 1987~Feb. 1988, 國防科技協調小組, CS-76-0210-D006-13。
2. “軸對稱滯流初始不穩定之探討,” 研究助理, Feb. 1989~Jan. 1990, 行政院國科會, NSC 78-0401-E006-33。
3. “停滯流流場之渦流結構,” 研究助理, Feb. 1991~Jan. 1992, 行政院國科會, NSC 80-0401-E006-35。
4. “邊界層隔板對三角翼渦流流場轉換過程的影響,” 主持人, Feb. 1993~Jan. 1994, 行政院國科會, NSC 83-0424-E013-006T。
5. “三維流場效應對停滯區渦流結構之影響,” 主持人, Feb. 1994~July 1995, 行政院國科會, NSC 83-0424-E013-007 及NSC 84-2212-E013-006。
6. “前緣形狀與分隔板對連機身之厚三角翼流場的影響,” 主持人, Aug. 1994~July 1995, 行政院國科會, NSC 84-2212-E013-001。
7. “剪力流對不同排列之圓柱體周圍流場之影響” 主持人, Aug. 1996~July 1997, 行政院國科會, NSC 86-2612-E013-001。
8. “剪力流對不同形狀柱體周圍流場交互作用之影響”, 主持人, Aug. 1997~July 1998, 行政院國科會, NSC 87-2212-E-013-003。
9. “並列之梯形平板尾流與縫隙流交互作用之流場探討,” 主持人， Aug. 1998~July 1999, 行政院國科會, NSC 88-2212-E-013-002。
10. “不同形狀柱體並列時之尾流與縫隙流交互作用的流場探討,” 主持人， Aug. 1999~July 2000, 行政院國科會, NSC 89-2612-E-013-001。
11. “應用MEMS壓力感測器研究滯流區紊流特性(II),” 協同研究人員， Aug. 1999~July 2000,行政院國科會, NSC 89-2612-E-006-020。
12. “極音速飛行體鼻端熔解層熱傳效應之數學模式分析,” 主持人， Aug. 2000~July 2001, 行政院國科會, NSC 89-2212-E-013-003。
13. “應用MEMS壓力感測器研究滯流區紊流特性(III),” 協同研究人員， Aug. 2000~July 2001, 行政院國科會, NSC 89-2218-E-006-070。
14. “如何提升軍校教師教學與研究水準之研究”, 主持人，Apr. 2001~Jul. 2001，國防部國軍九十年度「軍事教育專案研究」計畫，計畫編號：B26 -- 空02。
15. “極音速飛行體鼻端熔解層熱傳效應之數學模擬”, 主持人， Aug. 2001~Jul. 2002, 行政院國科會, NSC 90-2212-E-013-002。
16. “管流流量與壓力即時自動追蹤控制系統”，主持人， Jun. 2002~May 2003, 行政院國科會『補助提升產業技術及人才培育研究計畫』， NSC 91-2622-E-013-001-CC3。
17. “微型無人飛行載具之氣動力特性分析與研製（1/3）”，主持人， Aug. 2002~Jul. 2003, 行政院國科會, NSC 91-2212-E-013-001。
18. “微型無人飛行載具之氣動力特性分析與研製（2/3）”，主持人， Aug. 2003~Jul. 2004, 行政院國科會, NSC 92-2212-E-013-001。
19. “碳化燒蝕熱傳模式之數值模擬”，協同主持人，Jan. 2003~Dec. 2004，國防工業發展基金會委託學術機構研究計畫，NSC 92-2623-7- 013-002。
20. “微型無人飛行載具之氣動力特性分析與研製（3/3）”，主持人， Aug. 2004~Jul. 2005, 行政院國科會, NSC 93-2212-E-013-001。
21. “飛翼船動態模擬實驗”，協同主持人，2005/8/1至 2006/7/31，行政院國科會, NSC 94-2212-E-344-005-。
22. “實驗研究提昇空軍官校高年級生學習效能之建立與應用”，協同主持人, 2006，國防部國軍九十五年度「軍事教育專案研究」計畫，計畫編號：。
23. “以CFD輔助渦流流量計符合國家標準流量之設計”，協同研究人員， May 2007 ~ Apr. 2008, 行政院國科會『補助提升產業技術及人才培育研究計畫』，NSC 96-2622-E-214-005-CC3。
24. “奧特曼流量計的CFD模擬與輔助設計”，協同主持人， Aug. 2008 ~ Jul. 2009, 行政院國科會『補助提升產業技術及人才培育研究計畫』， NSC 97-2622-E-214-005-CC3。
25.「結合數值模擬技術與電磁流量計之量測於大口徑管流流量估算的研究」，協同主持人， Jun. 2010 ~ May 2011, 行政院國科會『補助提升產業技術及人才培育研究計畫』， 99-2622-E-214-005-CC3。
26.「方管內漸縮圓柱之渦流溢放頻率階梯化分佈的模擬分析(Numerical Study on Staircase-like Vortex Shedding Frequencies Downstream of a Tapered Circular Cylinder Inside a Square Duct)」，協同主持人， Aug. 2011 ~ Jul. 2012, 行政院國科會『補助提升產業技術及人才培育研究計畫』， NSC 100-2221-E-214-039 ($484,000)。
27.「渦流流量計上游之流場品質影響計量精確度的模擬分析」，協同主持人， Jun. 2011 ~ May 2012, 行政院國科會『補助提升產業技術及人才培育研究計畫』， NSC 100-2622-E-214-005-CC3 ($294,000)。

下載檔案：
教師網頁英文版(魏欽益)